ZEISS in India

ZEISS in India is headquartered in Bengaluru and present in the fields of Industrial Quality Solutions, Research Microscopy Solutions, Medical Technology, Vision Care and Sports & Cine Optics.

ZEISS India has 3 production facilities, R&D center, Global IT services and about 40 Sales & Service offices in almost all Tier I and Tier II cities in India. With 2200+ employees and continued investments over 25 years in India, ZEISS’ success story in India is continuing at a rapid pace. 

Further information at ZEISS India.

• Maintain good attendance and Good behavior towards your work.
• Wear proper PPE as instructed before entering workstation
• Maintain the work area, clean, safe and organized (6S).
• Before start of the work check with line leader about production plan.
• Operate equipment safely and effectively follow safety procedure.
• Follow the instructions given by line leader & supervisor.
• Maintain shift timings & avoid unnecessary talk while working.
• Ensure the product meets quality standards and specifications.
• Raise Andon ( call line leader) in case of shortage of material, man, machine breakdown, any abnormalities & any kind of support required.
• Clean all vessels, work tables, equipment's after work completion.
• Before & after filling check assemblies , do not send defect assembly.
• Ensure curing oven is pre celled before loading filled assembly trolley & switch on correct curing program.
• Do not spill chemical anywhere while working and dispose waste chemical in specified container.
• Do not open the running curing oven.
• Check all vessels are cleaned and good condition.
• Be cautious while handling chemical and take safety measures.
• Do not handover your work to other operator.
• Do not spill chemical on the floor and mix with other chemicals.
• Make sure to pressurize the vessel after each air purge.
• Check all assemblies for any bubbles and leaks. Do not send a defective assembly.

• Maintain good attendance and Good behavior towards your work.
• Wear proper PPE as instructed before entering workstation
• Maintain the work area, clean, safe and organized (6S).
• Before start of the work check with line leader about production plan.
• Operate equipment safely and effectively follow safety procedure.
• Follow the instructions given by line leader & supervisor.
• Maintain shift timings & avoid unnecessary talk while working.
• Ensure the product meets quality standards and specifications.
• Raise Andon ( call line leader) in case of shortage of material, man, machine breakdown, any abnormalities & any kind of support required.
• Clean all vessels, work tables, equipment's after work completion.
• Before & after filling check assemblies , do not send defect assembly.
• Ensure curing oven is pre celled before loading filled assembly trolley & switch on correct curing program.
• Do not spill chemical anywhere while working and dispose waste chemical in specified container.
• Do not open the running curing oven.
• Check all vessels are cleaned and good condition.
• Be cautious while handling chemical and take safety measures.
• Do not handover your work to other operator.
• Do not spill chemical on the floor and mix with other chemicals.
• Make sure to pressurize the vessel after each air purge.
• Check all assemblies for any bubbles and leaks. Do not send a defective assembly.

Your ZEISS Recruiting Team:

Jayashree V